Kern FiberCell Lasers


FiberCell Laser

The FiberCELL is a compact sheet metal fabricating fiber laser system, capable of cutting a variety of metals such as stainless steel, mild steel, aluminum, brass and copper. A Class 1 safety enclosure allows the system to be placed in high-traffic areas such as busy factory floors and university classrooms. Special polycarbonate windows are installed to ensure harmful laser wavelengths are filtered and cannot leave the enclosure.

SigmaNest® Techno™ is offered as an optional software package with the FiberCELL system. This advanced CNC laser software will maximize efficiency and machine throughput using nesting and NC functions, including common-line cutting, bridge cutting and lead–in/tab generation.

The FiberCELL uses Kern’s next generation HyperDual motion system, allowing users to take full advantage of the system’s powerful laser source.


FiberCell Laser inside open
[inches] [gauge] [mm]
Mild Steel oxygen .375 000 9.5
Stainless Steel nitrogen .125 11 3.1
Aluminum nitrogen .125 8 3.1
Brass nitrogen .080 12 2.0
Copper oxygen .075 15 1.9
improved vacuum table

Beam Delivery

A LaserMech FiberMini® beam delivery is installed on each FiberCELL system. The FiberMini features an easy to install cover lens which protects the focusing lens. The entire beam delivery is sealed and purged with positive gas to keep out dust and other particles.

servo motors

HyperDual Motion

The HyperDual system features a dual servo motor/rack and pinion design resulting in greatly improved speed and acceleration. The accuracy and repeatability of the FiberCELL’s motion system well exceeds the demands of Kern’s growing customer base.

class 1 laser enclosure

Safety Enclosure

The FiberCELL is equipped standard as a Class I, fully enclosed laser system. All doors and access points are interlocked ensuring a safe working environment. Special polycarbonate windows protect users from potentially harmful laser wavelengths.

laser software

Computer Package

A high performance computer, with Windows OS, is supplied with each FiberCELL machine. The computer is connected to the laser via Kern’s USB DSP technology and KCAM Laser Software. Nesting, common-line cutting, lead-ins and tabs are an easy task with SigmaNest® Techno™ Software.

fibercell side access panel

Front/Side Access

The FiberCELL features dual sliding doors at both ends of the laser system. Sliding access windows are also installed on both sides of the machine. The variety of access points ensures operators are able to access all areas of the table with ease.

assist gas laser

Programmable Gas

Up to three gas supplies can be hooked up and utilized simultaneously. For example, pierce stainless steel quickly with oxygen, then switch over to a nitrogen assist gas for the cut profile giving you a shiny edge quality and dross free cut.


Work Areas

units 52" x 50" 4' x 4' laser table

Laser Wattages

500 watt fiber laser 1000 watt fiber laser 1500 watt fiber laser

Standard Features

  • Capacitive Sensing Height Follower
  • Closed Loop Water Chiller
  • Exhaust Blower and Hose Kit
  • HyperDual Servo Motion Package
  • LaserMech FiberMini® ST Beam Delivery
  • High Performance Computer & LCD Monitor
  • CorelDRAW 2018 Software
  • KCAM Laser Software
  • Copper Slat Cutting Table
  • Splatter Reducing Double Nozzles

Optional Features