WELCOME To Epilog Laser's
Mini & Helix Laser Series

The Legend Series features our versatile CO2 laser machines and is utilized by customers for the highest-quality engraving and cutting of wood, acrylics, plastics, stone, and much more.

Learn more about why the Legend Series, from our small format Epilog Mini 18 to our popular Helix Laser, is the number one choice for engravers worldwide. With the high-quality motion control system and the most included user-friendly features on the market - the Legend Series consists of the best laser machines to meet your entrepreneurial and startup goals.

And we're proud to say the Legend Lasers are 100% designed, engineered and built in the USA!

Mini & Helix Laser machines and sizes

Legend Mini 18:

18" x 12" (457 x 305 mm)

Legend Mini 24:

24" x 12" (610 x 305 mm)

Legend Helix:

24" x 18" (610 x 457 mm)

Laser Power Options:

Mini 18: 30 or 40 watts
Mini 24: 30, 40, 50, or 60 watts
Helix: 30, 40, 50, 60, or 80 watts
Exhaust System: 350 - 400 CFM (595-680 m3/hr) external exhaust
to the outside or internal filtration system.

Don't Miss Out On Our Summer Sale!

Our MADE-IN-USA products and business solutions will take your idea to the next level.

Legend Laser Standout Features

USA Made Laser Machines

Engineered and Manufactured in the USA

Proudly designed, engineered, and manufactured in our Golden, CO headquarters at the base of the Rocky Mountains.


Robust CO2 Metal Tubes

CO2 Metal & Ceramic Laser Tubes by Epilog

All-metal tube design provides higher beam quality and longer life with low recharge costs.


High-quality stepper
motors made to last

Epilog's Accupoint™ Motion Control System with High Speed Servo Motors

The motion control provides higher detail engraving, even at the fastest speeds. The servo motors are known for their incredibly fast acceleration/deceleration and faster turnaround speeds on each engraved line.


Network Your Laser

Network Your Laser Across Your Business

The Zing Laser series features built-in Ethernet, USB, and a new wireless connection for more options for networking your laser.


Mini & Helix Radiance Beam Enhancing Technology

Straighter Stronger Beam

Higher Resolution Standard Optics
(Mini 24 and Helix only)

No additional, expensive lens packages needed for the highest resolution engraving with our Radiance™ Optics.


Load a tray of parts

Integrated Cutting Table

Included with each Legend System, the Vector Cutting Table provides better cutting quality.


Mini & Helix Radiance Beam Enhancing Technology

3D Laser Engraving Mode

Create Impressive Dimensional Relief Engravings

The 3D mode adjust the power applied to the material based on the grayscale in the artwork, creating stunning 3D designs.


Accessories for the Mini & Helix Laser Series

legend rotary attachment

Rim-Style Rotary Attachment

Available for all Epilog Legend systems, the Rotary Attachment adds the ability to engrave bottles, glasses, flashlights, and other cylindrical items.

Epilog PhotoLaser Plus for the Legend Series

Epilog Edition - PhotoLaser Plus

Epilog Laser has partnered with CADLink to bring you the industry’s best photo processing software: PhotoLaser Plus. The easy-to-use software interface and powerful photo processing tools allow you to create the highest-quality photo engravings in the industry.

PhotoLaser Plus
by CADLink

1.5" Lens: Great for small and highly detailed engraving at the highest-resolution


4.0" Lens: Cutting thicker materials and inside deep areas

convenience mini laser stand

Mini Laser Stand Option

An easy to use stand for moving your laser around your workspace. While the Helix comes with an included stand, the Mini 18 and Mini 24 are desktop units with an optional stand.

legend line pin table for the best flame cut edge

Vector Pin Table

Raise and support your cutting materials for better edge quality. The Pin Table incorporates movable pins that can be placed anywhere along the table's grid of one inch (25.4 mm) spaced holes. The table also allows you to place pins to support parts that would normally fall out of the cutting pattern. A handy removable surface plate makes the task of cleaning up small parts easy without removing the Pin Table.

legend air compressor for air assist

Air Compressor

This high-quality air compressor unit feeds 30 psi of air through the Air Assist structure, giving you the best cutting results available. The rubber vibration-dampening feet reduce the noise level of the compressor, and connection is a breeze with our quick-connect inlet and outlet ports on the compressor and the laser system.

Legend Laser Technical Specifications

Epilog Mini 18 Epilog Mini 24 Epilog Helix 24
Engraving Area 18" x 12"
(457 x 305 mm)
24" x 12"
(610 x 305 mm)
24" x 18"
(610 x 457 mm)
Maximum Material Thickness 4" (102 mm) 5.5" (140 mm) 8.5" (216 mm)
Maximum Material Thickness with Table Removed 6" (152 mm) with a 17.5" x 10" (445 x 254 mm) engraving area. 8" (203 mm) with a 23.5" x 11.75" (597 x 298 mm) engraving area. 11" (279 mm) with a 23.5" x 17" (597 x 432 mm) engraving area.
Laser Wattage 30 or 40 watts 30, 40, 50, or 60 watts 30, 40, 50, 60, or 80 watts
Laser Source State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable.
Intelligent Memory Capacity Multiple file storage up to 64 MB. Rolling buffer allows files of any size to be engraved.
Air Assist Attach an air compressor to our included Air Assist to remove heat and combustible gases from the cutting surface by directing a constant stream of compressed air across the cutting surface.
Laser Dashboard The Laser Dashboard™ controls your Epilog Laser's settings from a wide range of software packages - from design programs to spreadsheet applications to CAD drawing packages.
Red Dot Pointer Since the laser beam is invisible, the Red Dot Pointer on Epilog's Mini and Helix Lasers allows you to have a visual reference for locating where the laser will fire.
Relocatable Home When engraving items that are not easily placed at the top corner of the laser, you can set a new home position by hand with the convenient Movable Home Position feature on the Legend Series Lasers.
Operating Modes Optimized raster, vector or combined modes.
Motion Control System High-speed, continuous-loop, DC servo motors using linear and rotary encoder technology for precise positioning.
X-Axis Bearings Ground and polished stainless steel NeverWear Bearing System.
Belts Advanced B-style Kevlar Belts.
Resolution User controlled from 75 to 1200 DPI.
Speed and Power Control Computer or manually control speed and power in 1% increments to 100%. Vector color mapping links speed, power and focus to any RGB color.
Print Interface 10 Base-T Ethernet or USB Connection. Compatible with Windows® XP/Vista/7/8/10.
Size (W x D x H) 27.8" x 26" x 13.5"
(706 x 660 x 343 mm)
34.5" x 26" x 16"
(876 x 660 x 406 mm)
36.5" x 32" x 39.8"
(927 x 813 x 1011 mm)
Weight 70 lbs (32 kg)
100 lbs (45.5 kg) w/stand
90 lbs (41 kg)
120 lbs (55 kg) w/stand
180 lbs (82 kg)
Electrical Requirements Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase.
Maximum Table Weight The Mini 18 and 24 have a static table weight of 50 lbs (22.7 kg) and a lifting table weight of 25 lbs (11.5 kg). The Helix 24 has a static table weight of 70 lbs (32 kg) and a lifting table weight of 30 lbs (14 kg).
Normal Sound Level 59 db 59 db 62 db
Ventilation System 350 - 400 CFM (595-680 m3/hr) external exhaust to the outside or internal filtration system is required. There is one output port, 4" in diameter. 350 - 400 CFM (595-680 m3/hr) external exhaust to the outside or internal filtration system is required. There is one output port, 4" in diameter.